A) 2014 Carlsen & Associates Waukesha 130 Wine/Must Pump: This Like New pump is the ONE pump that will do virtually all phases of wine production from moving must (up to 25 tons per hour) from the destemmer-crusher, juice transfers, barrel work, filtration, (with flows as small as 10 gpm with pressures to 3+ bar) and bottling.

[Equipment Model] Carlsen & Assoc. Waukesha 130 Wine and Must Pump

B) 2014 Carlsen & Associates SCREW SUMP for Waukesha 130: This portable sump sits under the discharge of the destemmer-crusher or receiving hopper.

[Equipment Model] Carlsen Screw Sump for Waukesha 130

DETAILS –

A) Wine & Must PUMP includes:

• Waukesha 130 Pump Head:
  Constructed of 316 stainless steel.
  Single O-ring seals
.
  Stainless steel rotors.
  3″ Triclamp inlet and outlet.
• Motor:

  7.5 hp high efficiency motor.
  Totally enclosed, fan cooled.
  Cast iron construction.
• Gearbox:
  
Output speed of 547 rpm.
  Helical gearing.
  Electrical Controls.
  Variable frequency drive.
  Waterproof enclosure and switches.
  Two-position forward/reverse switch.
• Removable remote control feature:
  With a three-position local/off/remote selector switch, 6″ pigtail and watertight cord connector,  50′ of power cord (the electrical plug is to be supplied by the customer). Speed control mounted in a rubber-booted plastic housing with 50′ of cord. Cart Foam-filled tires with polypropylene hubs 1-1/2″ stainless steel tubing Stainless steel fitting basket.
• Applications:
  Must Pumping
  Barrel Work
  Juice Transfer
  Filtering
  Bottling
• Standard Features
  Flows 0 – 135 gpm
  Pressures up to 80 psi
Domestic Motor and Gearbox
Variable Frequency Drive
NEMA 4X Enclosure
Variable Speed
Remote Speed Control
Stainless Steel Cart
  Options Available
Pressure Control
Fitting Variations

B) SCREW SUMP for Waukesha 130 Includes:

This sump is portable and sits under the discharge of the destemmer-crusher or receiving hopper. The start/stop on the screw sump will coordinate with the must pump control so that starting and stopping the sump will also start and stop the must pump.

• Sump Construction
:
  1-1/2″ square tube stainless steel frame.
  12 gauge stainless steel body.
  Stainless steel casters with brakes.
• Screw Conveyor
:
  9″ diameter stainless steel conveyor screw.
  Seal-welded on both sides of screw.
  UHMW flight edging Motor and Gearbox
.
  1 hp TEFC motor
.
  60 rpm Gearbox
.
  Fittings and Connections
.
  4″ male camlock on sump snout
  4″ female camlock x 3″ Triclamp fitting with clamp and gasket (connects sump to pump).

All fittings are stainless steel Electrical Controls Variable frequency drive Waterproof enclosure and switches Forward/Reverse switch Panel mounted speed control Pigtail for utilizing remote stop/start devices 50′ of power cord (the electrical plug is to be supplied by the customer) 10′ of cord for connection to the must pump control for stop/start devices.

• Standard Features
:
  Designed for the Waukesha 130
.
  Domestic Gearbox and Motor
.
  Stainless Steel Construction
.
  Variable Frequency Drive
.
  NEMA 4X Enclosure.
  Variable Speed – Forward and Reverse.
• Connection Features:
  Automatic Control of the Pump’s Stop/Start Function Easy Camloc Connection